Model: Ultrasonic Flowmeter/Heat Meter
Ultrasonic flowmeter = host + ultrasonic sensor
Ultrasonic heat meter = host + ultrasonic sensor + temperature sensor
product details
Selling Units: Single item
Single package size: : 39*26.5*16.5cm
Single gross weight:1.500 KG
二、For Series Ultrasonic Flow/Heat Meters utilize the transit-time principle to measure the velocity of relatively clean liquids in full pipes.
The purpose of this guide is to provide installation procedures and basic operating instructions for Series Ultrasonic Flow/Heat Meters.
Installation Procedure
1.1 Composition of Ultrasonic flow meter
Ultrasonic Flow meter = Converter + transducer
Ultrasonic Heat meter = Converter + transducer + Temperature transducer
1.2 Types of Converters
Model | Wall Mount Ⅰtype | Wall Mount Ⅱtype | Wall Mount Ⅱtype(Grey) | Explosion proof |
Picture | ||||
Model | Panel mount | Module | Fix Mount | |
Picture |
1.3 Types of Flow/Temperature transducers
Flow transducer | Picture | Model | Measuring range | Temperature |
Clamp on | TS-2 (small) | DN25-100 | -30 ~ 90℃ | |
TM-1 (medium) | DN50-700 | |||
TL-1 (large) | DN300-6000 | |||
High temp. Clamp on | TS-2-HT (small) | DN25-100 | -30 ~ 160℃ | |
TM-1-HT (medium) | DN50-700 | |||
TL-1-HT (large) | DN300-6000 | |||
Insertion | TC-1 (standard) | DN50-6000 | -30 ~ 160℃ | |
TC-2 (extended) | ||||
TP-1 (parallel) | DN80-6000 | |||
Inline | Standard | DN15-1000 | -30 ~160℃ |
Temperature transducer | Picture | Model | Measuring range | Temperature | Cutoff water |
Clamp on |
CT-1 |
DN50-6000 |
-40 ~ 160℃ |
No need | |
Insertion |
TCT-1 |
DN50-6000 |
-40 ~ 160℃ |
Need | |
Insertion under pressure |
PCT-1 |
DN50-6000 |
-40 ~ 160℃ |
No need | |
Insertion small sizes |
SCT-1 |
< DN50 |
-40 ~ 160℃ |
Need |
2. Check Components
1. Please check you have all the components in the order.
2. All codes on the converter and transducers should be matched. They are used in sets.
transducer Codes transducer Codes on Converter
3. Measuring Diagrams
3.1 Separated Mounting
| ||
Clamp on | Insertion | Inline |
3.2 Separated Mounting
| ||
Clamp on | Insertion | Inline |
Note: Mounting of Wall Mount, Panel mount,Module,and Explosion proof are in the same way.
3.3 Fixed Mounting
Clamp on | Insertion | Inline |
3.4 Module type
|
| |
Clamp on | Insertion | Inline |
Temperature and heat can be measured by connecting PT100 temperature sensors on both water supply and return pipes.
Product application:
Mainly used in sewage plant, water plant, mine, water conservancy, power plant, chemical plant, steel plant
The monitoring of waterlogging and water, sewage quality, urban pipeline and rainfall station in the construction of smart city project; applicable to the monitoring of rainfall point of existing water conservancy projects, river water and rain monitoring, reservoir water and rain monitoring, flow station, irrigation area, open channel monitoring, etc.; automatic monitoring of water plant, on-line water quality monitoring and secondary water supply monitoring of smart water project; suitable for intelligent water project It is used for the monitoring of collapse and landslide points, debris flow and surface water level of geological disaster projects
TOP